IGEBA UNIPRO 40-T
The Unipro 40-T is a high-performance ULV fogging machine – amongst all cold foggers – and versatile in its fields of application. The spray nozzles of the Unipro 40-T can be lifted to a height of up to 4.30m with its adjustable telescopic mast. This enables advanced treatment possibilities, e.g. in large scale greenhouse horticulture. The free space above the plants can now be used more effectively allowing the fog to spread further without any hindrance.
The compact construction of the Unipro 40-T enables easy operation and problem-free transport even through standard door frames. The suction hose of the Unipro 40-T allows it to feed the active solution directly from any appropriate container. The integrated hose pump with pulsation damper pumps the active solution continuously to the spray nozzles. The output can be adjusted easily whereas an output of 42 l/h guarantees the ideal droplet spectrum of < 20 microns. The Unipro 40-T is also perfectly fit for fungicides and systemic agents due to its maximum output of 60 l/h. Even effective microorganisms can be used without a problem. Fogging concentrated plant protection products with the Unipro 40-T can reduce the amount of water significantly in comparison to conventional spraying. This also avoids high drain-off losses.
The Unipro 40-T can be operated automatically with its flexible control options. Two build-in interfaces allow optional connection of time controller or to any external dry contact. That enables the user, i.e. to fog during night-time as well. This results in a reduction of costs for personnel and the user is not exposed to the chemical products during the application.
Additional Advantages
- No transfer of the active solution is required – fogging directly from the external container
- Operator protection
- High area efficiency
- Uniform distribution of the fog within the space
- High penetration depth of approx. 120m
- More even distribution of the plant protection product compared to conventional spraying
- Compact design, easy use and cleaning
- Ideal for insecticides, fungicides and effective microorganisms
- Perfect for disinfection
Why ULV Application?
IGEBA ULV Aerosol Generators keep the application rate (volume of chemical solution per area) as low as possible, thus reducing costs and treatment time.
The chemical preparation is directed to the spray nozzle where a powerful blast of compressed air from the blower breaks up the chemical solution into minute droplets. A stainless steel dosage nozzle ensures a constant application rate and largely droplets of uniform size.
Spray nozzles of IGEBA ULV Aerosol Generators work in a special way. The spray nozzles are designed in a two-step-system. The droplet stream is bundled through the special aerosol nozzle without touching its inner surface.
Compared to the traditional spraying or LV method, the ULV method produces smaller droplets. Therefore more droplets are produced out of the same volume of chemical preparation. Smaller droplets mean a greater density of fog, better distribution and therefore higher effectiveness.
